|Jenny's Card Project - 80. |
Craft Creations products used to make this card:
DCD577 - Purple Romance Decoupage Sheet.
CRC314P - Purple Romance Creative Card.
MIR07PA4 - Purple Mirri Paper.
CNT111CA4 – Lavender Centura Pearl Card.
XL563U-01 and XL564U-01 – Gold Peel-Off Sticker Letters.Visit the Craft Creations Shop
Fold the sheet of purple romance card in half with the print side out.
Cut 48mm from the right hand edge of the front panel and stick to the inside back panel.
Cut a 5mm wide strip of mirri paper and stick beside the romance card on the back panel.
Stick layer 1 of the decoupage to the mirri paper and trim to leave a 2mm border all around it.
Stick this onto the pearl lavender card and trim to leave a 2mm border around this too.
Stick the panel onto the card front with a 15mm gap to the left and top edge the right edge will overlap the panel and should not be stuck.
Add the rest of the layers to the decoupage design.
Mount the heart and swirl panel from the decoupage sheet on the pearl lavender card leaving a 2mm border.
Add the wording to the small panel using the peel-off letters and stick this, by the left side only, to the front panel as shown in the picture.